Vertical SBX IP 320 Installation Manual page 111

[Connection] Menu
[Modem Connect] Sub-menu
[Modem Connect] establishes modem connection with the setting values from [Modem
Configuration].
Conditions:
•
•
•
•
Procedure:
1.
If a connection failure occurs, an error message is shown. The reason for the failure may
be improper installation of the modem, turning-off state of the modem, busy state of the
destination, or various telecommunication problems that may occur during the session.
If an unavailable phone number is entered or the full phone number is not entered or the
destination does not answer, the connection is disconnected after a period of time that
was set from [Modem Configure] as a time-out value.
When making a modem connection, a [Call Status Dialog] window that shows the status
of the modem call appears. This program shows call status messages sent from the
modem or modem device driver. Therefore, the messages in the [Call Status Dialog]
window may differ from modem to modem. The [Call Status Dialog] window can be
hidden from the screen by clicking the [Hide] button on the right of the [Call Status
Dialog] window.
When the modem connection is established, you cannot select this menu. The menu item
is disabled in that case.
Select the [Modem Connect] sub-menu in the [Connection] menu. => [Phone Number
Dialog] appears.
-or-
Use the icon in the toolbar to execute the same command.
SBX IP 320 Installation Guide
Chapter 9: Remote Diagnostics
-
9 11