Vertical IP2007 Application Note

Hide thumbs Also See for IP2007:

Download this manual See also: User Manual, Application Note

Application Note – Defaulting Xcelerator IP and IP2007 Phones

This application note addresses the procedure to reset Xcelerator IP and IP2007 back to their

factory default settings.

Defaulting Xcelerator IP

There are two methods of defaulting the Xcelerator IP.

1. When logged into the X-IP, on the left side of your browser screen click on Management,

then Settings. You will see the following screen:

In the middle of the screen you will find "Tools -- Restore Default Settings"

Click on the button that says Restore to Default Settings. You will get a pop-up asking if you

are sure that you want to restore Xcelerator IP back to its factory default settings.

1 of 3

Xcelerator IP 07007

July 2007

Page 1 Application Note – Defaulting Xcelerator IP and IP2007 Phones Xcelerator IP 07007 This application note addresses the procedure to reset Xcelerator IP and IP2007 back to their factory default settings. Defaulting Xcelerator IP There are two methods of defaulting the Xcelerator IP.
Page 2 Click the OK button and you will see the following screen. 2 of 3 July 2007...
Page 3 Defaulting the IP2007 phones There are two methods for defaulting the IP2007 phones. The first method involves using the soft keys on the IP2007. From the phone that you wish to default 1. Press the soft key labeled Config (left most soft key) 2.

Xcelerator ip