Vertical SBX IP 320 Installation Manual page 107

[Connection] Menu
[Serial Port Configure] Sub-menu
[Serial Port Configure] is for configuring the serial port of the PC that is to be connected to the
SBX IP 320 system.
•
•
Procedure:
1.
2.
When the serial port connection is established, you cannot select this menu. The menu
item is disabled in this case.
Setting values are stored for the next session, at which time they are automatically
restored and used.
Select [Serial Port Configure] sub-menu in the [Connection] menu. The [Serial Port
Configuration Dialog] appears.
Enter setting values.
[Port] : Select connection port to be connected to the SBX IP 320.
[Baud Rate] : Select one of 2400bps, 4800bps, 9600bps. Selected [Baud Rate] must be
same as that of the SBX IP 320.
SBX IP 320 Installation Guide
Chapter 9: Remote Diagnostics
-
9 7