Vertical SBX IP 320 Installation Manual page 77

Basic Programming
STA Board
1. Press the [TRANS/PGM] button + PGM number (103).
2. Press the [FLEX 2] button.
3. Enter logical slot number (STA board slot: 01-04).
4. Press the [HOLD/SAVE] button to accept change.
VMIU Board
1. Press the [TRANS/PGM] button + PGM number (103).
2. Press the [FLEX 3] button.
3. Enter logical slot number (VMIU Slot: 09).
4. Press the [HOLD/SAVE] button to accept change.
Numbering Plan Type (PGM 104)
To program the Numbering Plan Type, perform the following:
1. Press the [TRANS/PGM] button + 104.
2. Enter the Numbering Plan Type (1 digit, refer to the following Table).
3. Press the [HOLD/SAVE] button to accept changes.
Table 6-3 Slot Definition
NUMBER SET
TYPE/ PRESS #
INTERCOM RANGE
01 100-147
02 100-147
03 100-147
04 700-747
05 200-247
06 21-68
07 100-147
08 100-147
SBX IP 320 Installation Guide
Chapter 6: Starting the SBX IP 320
DEFAULT
Yes As the basic type, the 1st digit of the
Station number should be 1-4
No The Station number can be changed up
to 799
No
No
No
No
No
No The Station number can be changed up
to 999
-
6
REMARK
9