Vertical SBX IP 320 Installation Manual page 113

[Connection] Menu
To enter a new phone number:
1.
2.
3.
4.
To modify an existing phone number:
1.
2.
Click the [New] button to enter a new phone number => [Edit Phone Number Dialog]
appears.
Enter the [Name] and [Phone Number]. The [Name] and [Phone Number] can be up to 40
characters, respectively. Five special characters cannot be entered for the [Name]. These
characters are the left and right brackets (parens), the left and right braces, and the
semicolon. For [Phone Number], only [Dialable Characters] can be input (refer to the
description below for detailed explanation about [Dialable Characters]).
A newly entered phone number is shown in the [Phone Number Dialog] if the [OK]
button is clicked. Click the [Cancel] button to cancel the input.
If you want to save the new phone numbers into a [PhoneNo.txt] file for future use, click
the [Save] button in the [Phone Number Dialog]. If you close the [Phone Number Dialog]
window without clicking the [Save] button, the newly entered phone number will be lost.
In the [Phone Number List Box], select a phone number item to be modified by clicking
the [Name] of the item.
After a selection is made, click the [Modify] button. => the [Edit Phone Number Dialog]
appears.
SBX IP 320 Installation Guide
Chapter 9: Remote Diagnostics
-
9 13