Audio Only Recording - Lightspeed Redcat Access LSRCA 1881 User Manual

AUDIO ONLY RECORDING

In addition to video recording, teachers can record just the audio of a lesson or student
interaction.
1. Tap the record tab
• Verify the Bluetooth audio connection is present
as indicated by a "headphone" icon in the lower
left hand corner.
• Select Audio at the top of the screen.
2. Select desired audio source
• Note the selected source indicated in the upper
left hand corner of the screen.
• If you wish to change the source, swipe right to
reveal the control arc.
• To record teacher audio only, select the class
button. Make sure your microphone is unmuted.
• For student audio, select the desired Pod.
NOTE: For optimum student audio quality, mute
the teacher microphone.
3. Begin recording
• Tap the red record button to begin the audio
recording.
• To capture a still photo during the recording, tap
the white shutter button
• To end the recording, press the stop button.
• You will see the last recorded audio file appear
as a thumbnail for quick review.
36
Redcat Access is part of the
Offices Australia wide (03)93709355
www.hearandlearn.com.au
www.hearandlearn.com.au
1
2
1
3
technology family.