Lightspeed Redcat Access LSRCA 1881 User Manual page 26

SHAREMIKE: INITIAL SET-UP
1. Ensure the Redcat is on. The blue
light on the front of the Redcat will
glow.
2. Turn on the Sharemike by pressing
and holding the power button until
the LED lights.
3. Grip the barrel in the center section.
4. While speaking in a normal voice,
increase the volume on the Redcat
Access MICROPHONE VOLUME knob
until your voice is barely audible.
REMEMBER: This equipment is designed
to supplement and distribute the user's
voice so they are able to speak in a
conversational tone. Having the volume
set too high will result in feedback and
listener fatigue.
26