Lightspeed Redcat Access LSRCA 1881 User Manual page 17

2. CONNECTING THE POWER SUPPLY
1. Locate the power supply and AC
power cord. Connect the AC power
cord into the DC power supply.
REGISTER
AUDIO IN
MIN
Power On
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
24V/1.75A
2. Insert the DC connector into the "DC
INPUT" on the Redcat and plug the
other end to an electrical outlet.
3. The Redcat automatically powers
on and the blue POWER LED on the
front panel will light.
4. For operation instructions when the
L14V battery pack is installed, see
page 47.
www.hearandlearn.com.au
Redcat Access is part of the
Offices Australia wide (03)93709355
www.hearandlearn.com.au technology family.
17