Lightspeed Redcat Access LSRCA 1881 User Manual page 33

PAIR YOUR MOBILE DEVICE TO ACTIVATE
STATION
You will need to pair your mobile device with Activate Station in order to use your device
as a remote control. Additionally, you will also need to pair it with Bluetooth in order to
play audio from your device through the classroom speaker as well as be able to record
through the App.
1. Turn on Bluetooth in your mobile device. Find and open the Activate App.
2. Follow the pairing instructions on the App to take you through the two pairing
processes.
3. Begin the first process by pressing the Bluetooth 1 pairing button on the back of
your Activate Station to connect to the Redcat for remote control functionality. Once
paired, any registered pods, if purchased, will appear on the mobile app. - please
note the device name of the connected Activate Station.
4. You can now pair to Bluetooth audio. The app will take you through a pairing guide
and will instruct you to go to your mobile device Settings>Bluetooth. Choose your
Activate Station number (ACT_XXXX_BT1) from the list of unpaired devices.
5. Next enter the pin #0000 to complete the pairing process.
6. Press the pair button within the app when prompted. The device should now show as
connected.
7. Return to the Activate mobile app. It will take you through a tutorial on how to use
the various functions, including some additional functions available only through the
app.
8. If there is a second Flexmike for team teaching, repeat the above process with a
second mobile device and press the Bluetooth 2 button on the back of the Activate
Station.
www.hearandlearn.com.au
Redcat Access is part of the
Offices Australia wide (03)93709355
Bluetooth Pairing
www.hearandlearn.com.au technology family.
33