Activate Station: Record And Capture; Video + Audio Recording - Lightspeed Redcat Access LSRCA 1881 User Manual

ACTIVATE STATION: RECORD AND CAPTURE

VIDEO + AUDIO RECORDING

The Activate mobile app allows teachers to utilize their device video camera synced
together with the Activate system audio for Lesson Capture and to capture key moments
in the classroom. Through the Bluetooth audio link, the App will seamlessly sync up the
selected audio source (teacher microphone or Pod) with the video you have recorded.
1. Tap the record tab
• Verify the Bluetooth audio connection is
present as indicated by a "headphone"
icon in the lower left hand corner of the
screen.
• Select Video capture at the top of the
screen.
2. Select desired audio source
• Note the selected source indicated in the
upper left hand corner of the screen.
• If you wish to change the source, swipe
right on the screen to reveal the control arc.
• To record teacher audio only, select the
class button. Make sure your microphone
is unmuted.
• To record student group audio, select the
desired Pod.
NOTE: For optimum student audio quality,
the teacher microphone should be muted.
3. Select front or rear camera
4. Begin recording
• Tap the red record button to begin the
video recording.
• To pause the video recording, tap the
pause button.
• To end the recording, press the stop
button.
• To capture a still photo during the
recording, tap the white shutter button.
• You will see the last recorded video appear
as a thumbnail for quick review.
www.hearandlearn.com.au
Redcat Access is part of the
Offices Australia wide (03)93709355
1
2
1
www.hearandlearn.com.au technology family.
3
4
35