Lightspeed Redcat Access LSRCA 1881 User Manual page 21

6. OUTPUT TO ASSISTIVE LISTENING
DEVICE (ALD)
1. Turn the ALD (Assistive Listening
Device) volume control on
the Redcat Access side panel
counterclockwise all way the down.
2. Determine the size and type of
audio input jack on the device as
many manufacturers' products
differ in connector size and shape.
Many personal FM transmitters
require a 3.5mm to 3.5mm
patch cable (part# MSC3535, not
included).
3. Connect a patch cable from the
ALD's microphone jack or AUX input
to the 3.5mm audio jack labeled
"ALD OUT" on the side of the
Redcat.
www.hearandlearn.com.au
Redcat Access is part of the
Offices Australia wide (03)93709355
4. With the Redcat and ALD turned on,
speak into the Flexmike and slowly
adjust the ALD volume control
until the appropriate audio level
is attained in the ALD's receiver
headphones.
5. It may be necessary to also adjust
the volume on the Personal FM
receiver to achieve appropriate
volume level.
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
24V/1.75A
www.hearandlearn.com.au technology family.
21