Additional Capabilities With Activate App - Lightspeed Redcat Access LSRCA 1881 User Manual

ADDITIONAL CAPABILITIES AVAILABLE WITH
ACTIVATE APP
Additional volume adjustments:
On the Volume tab, the teacher can adjust headphone
volume, Microphone #1 and #2 volume, volume level on
the Access Link audio input, and Activate Audio In and Out.
Enable Sleep mode (1):
Your Access Link comes with sleep mode disabled by
default, keeping it powered on and operable at all times.
To engage sleep mode, toggle it to the ON position in the
settings tab. The Access Link will go into sleep (low power)
mode after 2 hours of no activity. Wake the system back up
by un-muting a microphone.
Input priority (2):
Turning this feature on gives all priority to an audio source
connected to the amplifier audio input. When an audio
signal is detected, all other audio coming through the
amplifier (including both microphones) will be muted until
the audio input signal ends. Microphone audio will then
automatically come back.
Record out (3):
This allows users to set up REC Output as a fixed level
recording output to connect to an external video camera.
• When toggled on, this output will provide a fixed
level of audio from the teachers microphone(s)
when class speaker is selected. This audio level
is not effected by adjustments to the Audio Out
volume. Select Mic or Line level signal depending
on the recording device.
• When toggled off, this output will provide a variable
level output from the classroom speaker. To adjust
the level, press the Audio Out Volume buttons on
the front panel. Use this setting when interfacing
with ALD.
Reset Default Settings:
Pressing this will return the Activate App to its original
settings, including volume levels.
Unpair:
Press this button to unpair your mobile device from the
Activate system. This is useful if you wish to take your
device to pair up with a system next
40
Redcat Access is part of the
Offices Australia wide (03)93709355
door.
www.hearandlearn.com.au
www.hearandlearn.com.au
1
2
3
technology family.