Lightspeed Redcat Access LSRCA 1881 User Manual page 25

SHAREMIKE: CHARGING
1. Make sure the charger is plugged
into a wall outlet. Connect one end
of the charging cable into the jack
labeled CHARGE on the bottom of the
Sharemike.
2. Plug the other end into the USB jack
on the back of the cradle charger.
3. If the Sharemike is registered as MIC
2, the MIC 1 light on the microphone
will glow red to indicate charging.
PLEASE NOTE: The Redcat and Microphone(s) are registered together at the factory.
If you have purchased a Sharemike with your Redcat, keep all components together
as a system. Moving them from one system, or room, to another will result in the need
to re-register.
www.hearandlearn.com.au
Redcat Access is part of the
Offices Australia wide (03)93709355
4. Leave the Sharemike plugged in
overnight (8-10 hours) to obtain a full
charge. The light will turn green when
charging is complete.
5. If Sharemike is registered as MIC 1,
low battery and charging indicator
will be the MIC 2 light.
6. During charging the blue light will
stay on.
www.hearandlearn.com.au technology family.
25