Adamson IS Series Rigging Manual page 9

3.0 Rigging Components
3.1 Accessories
(930-0028) IS10 & IS119 Rigging Frame
Upon receipt of the product, verify that all components listed below are present.
The IS10 & IS119 Rigging Frame can be used to suspend IS10 or IS119 cabinets. It can also be used as an additional
transition frame between IS10 cabinets and IS119 cabinets, either while suspended or while stacking IS10 cabinets on
IS119 cabinets.
The IS10 & IS119 Rigging Frame has a maximum load capacity of 622 kg / 1371 lbs. The IS10 & IS119 Rigging Frame
can be used to suspend a maximum of 23x IS10s, or 12x IS119.
Instances wherein the tilt and curvature of the array causes the centre of gravity to be outside of the depth of the frame,
use of the Extended Beam (930-0021) or Moving Point Extended Beam (930-0033) is necessary.
5
Ø 12 mm / 0.63 in
Adamson Systems Engineering | IS-Series Rigging Manual
6
4
3
2
396 mm / 15.6 in
No. Component
1 Rigging Link
2 Stacking Link
3 Quick-Release Pin
4 Lifting Plate
1
5 M6 Screw
6 Rear Link
Quantity
4
2
6
2
16
2
737 mm / 29 in
Page 9