Advertisement
Quick Links
Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
View the S-Series Rigging Tutorial video and/or read the S-Series Rigging Manual before suspending
the product.
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
S10 User Manual
3
4
5
6
7
8
9
Page 1
Advertisement
Related Manuals for Adamson S Series
Summary of Contents for Adamson S Series
- Page 1 Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
- Page 2 S10 User Manual Distribution Date: August 15, 2022 Copyright 2022 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. -
Page 4: Product Introduction
S10 Sub Compact Line Array • The S10 is a sub-compact, 2-way, full range line array enclosure designed for extended throw capabilities. It contains two symmetrically arrayed 10” transducers and a 4” compression driver mounted on an Adamson waveguide. •... -
Page 5: Wiring
Pins 3+/- are connected to the 2x ND10-LM MF transducers, wired in parallel. • Pins 4+/- are connected to the NH4TA2 HF transducer. • Pins 1+/- and 2+/- are not connected. S10 Jackplate PARALLEL INPUTS S10 Internal Wiring S10 User Manual Adamson Systems Engineering | Page 5... -
Page 6: Amplification
The S10 is paired with Lab Gruppen PLM+ Series amplifiers. Maximum quantities of the S10, or S10 paired with S119 per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found here, on the Adamson website. 4x S10 per circuit... -
Page 7: Presets & Control
Lake Controller to adjust the contour of the array. Recalling the appropriate EQ overlay or preset for the number of cabinets being used will provide the standard Adamson frequency response of your array, compensating for different low-frequency coupling. -
Page 8: Technical Data
141.3 dB Components LF 2x ND10-LM 10” Kevlar® Neodymium Driver 737 mm / 29 in Components HF Adamson NH4TA2 4” Diaphragm / 1.5” Exit Compression Driver Nominal Impedance LF 2 x 16 Ω (8 Ω) Nominal Impedance HF 8 Ω... -
Page 9: Accessories
Accessories There are a number of accessories available for the Adamson S10 line array cabinets The list below is only a few of the accessories available. Sub-Compact Support Frame (930-0025) Support frame for S7, CS7, S118, and CS118 enclosures Extended Beam (930-0021)