Advertisement
Quick Links
Advertisement
Related Manuals for Adamson IS10
Summary of Contents for Adamson IS10
- Page 2 Distribution Date: June 1st, 2018 • Copyright 2019 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
A qualified technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specified local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. -
Page 4: Product Introduction
• Up to 16 IS10 can be flown in the same array when using the IS10 & IS119 Support Frame (930-0028) and up to 4 when using the IS10 Micro Frame (930-0030). Due to the use of Controlled Summation Technology, the IS10 maintains a consistent nominal horizontal dispersion pattern of 110°... -
Page 5: Wiring & Amplification
Wiring & Amplification Wiring • The IS10 (973-0006) comes with 2x Neutrik Speakon™ NL4 connections, wired in parallel. The IS10b (973-0007) comes with an external barrier strip. • • Pins 1+/- are connected to the 2x ND10-LM MF transducers, wired in parallel. - Page 6 Use LoadSmart™ verification to ensure that all connections are made properly. On the D-Series line of amplifiers, LoadSmart™ can be accessed through Lake Controller. Please refer to the Adamson Lake & PLM Handbook, which is included in the Adamson LoadLibrary, which can be found on the Adamson Website.
-
Page 7: Presets & Control
Control Tilt overlays (found in the Array Shaping folders of the Adamson LoadLibrary) can be used to alter the overall acoustic response of an array. Tilt overlays apply a filter, centered at 1kHz, which reaches the noted decibel cut or boost at the extreme ends of the listening spectrum. -
Page 8: Acoustic Data
1.5 kHz 3 kHz 6 kHz 10 kHz 20 kHz IS10 Horizontal Pattern - Grey = -6 dB, Black = -12 dB Technical Specifications Frequency Range (+/- 3dB) 60 Hz - 18 kHz Nominal Directivity (-6 dB) H x V 110°...