Suspending Is7 Below Is118 - Adamson IS Series Rigging Manual

4.0 Rigging Procedures
4.8 Suspending IS7s below IS118s
1. After completing 'Suspending IS118s' to the
desired number of IS118s, prepare a second
IS7/IS118 Rigging Frame by removing all Quick
Release L-Handles and the 2 Lifting Plates as
well as all links,
2. Prepare the bottom IS118 by affixing the
Rigging Links so that the 2 screw holes are
affixed to each corner of the subwoofer with T25
screws.
Adamson Systems Engineering | IS-Series Rigging Manual
Page 32