IS-Series Line Array Rigging Manual
Version 1.1
•
Distribution Date: March 1st, 2020
•
Copyright 2020 by Adamson Systems Engineering Inc., all rights reserved
This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe
place and make it available upon request to any operator.
This manual must be included in the resale of an IS-Series system.
If this manual becomes damaged or additional copies are needed, please email support@adamsonsystems.com.
Declarations
EU Declaration of Conformity
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,
Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com
Adamson Systems Engineering declares that the prod-
ucts stated below are in conformance with the relevant
fundamental health and safety criteria of the applicable
EC Directive(s), in particular:
Directive 2014/35/EU: Low Voltage Directive
Directive 2006/42/EC: Machinery Directive
Loudspeakers
971-0003 IS7
971-0004 IS7b
973-0006 IS10
973-0007 IS10b
973-0008 IS10n
973-0009 IS10nb
994-0005 IS119
994-0006 IS119b
992-0010 IS118
992-0011 IS118b
Accessories
930-0026 IS7/IS118 Support Frame
930-0028 IS10/IS119 Support Frame
930-0029 IS7 Micro Frame
930-0030 IS10 Micro Frame
930-0021 Extended Beam
930-0033 Moving Point Extended Beam
Established at Port Perry, ON. CA - June 1st, 2017
------------------------------------------------
Brock Adamson (President & CEO)