4.0 Rigging Procedures
4.7 Suspending IS118
1. Affix the rigging links on the subwoofer so that
the ends with two screw holes are affixed to each
corner of the subwoofer with the T25 screws
supplied. (fig. 5)
2. Remove all links from the Rigging Frame by
removing the T25 Torx screws (a) affixing them
in place. Place the screws in a secure place for
future use.
Adamson Systems Engineering | IS-Series Rigging Manual
fig. 5
a
a
Page 30