Suspending Is10 Below Is119 - Adamson IS Series Rigging Manual

4.0 Rigging Procedures
4.10 Suspending IS10s below IS119s
1. After completing 4.9 Suspending IS119 to the
desired number of IS119s, prepare a second
IS10/IS119 Rigging Frame by removing all Quick
Release L-Handles, 2 Lifting Plates, the Ground
Support Links, and the Rigging Link on each of
the.4 corners. Do not remove the 2 Rear Rigging
Links.
2. Prepare the bottom IS119 by affixing the
Rigging Links so that the 2 screw holes are
affixed to each corner of the subwoofer with T45
screws.
Adamson Systems Engineering | IS-Series Rigging Manual
Page 37