Adamson IS Series Rigging Manual page 12

3.0 Rigging Components
3.1 Accessories
(930-0033) Moving Point Extended Beam
Upon receipt of the product, verify that all components listed below are present.
The Moving Point Extended Beam can be used in conjunction with either the IS10 & IS119 Rigging Frame, or the IS7 &
IS118 Rigging Frame when the array's curvature puts the centre of gravity outside of the depth of the Rigging Frames.
The moving point allows the user to achieve specific tilt angles when using only a single pick point.
When using the Moving Point Extended Beam, ensure the weight of the suspended array falls within the load limits of
the Rigging Frame being used.
2
1
Adamson Systems Engineering | IS-Series Rigging Manual
No.
1
2
813 mm / 32 in
Component Quantity
Rigging Pin 1
Second Point Link 2
Page 12