Rigging Components - Adamson IS Series Rigging Manual

3.0 Rigging Components

3.1 Accessories
(930-0026) IS7 & IS118 Rigging Frame
Upon receipt of the product, verify that all components listed below are present.
The IS7 & IS118 Rigging Frame can be used to suspend either the IS7 or IS118 cabinets. It can also be used as an
additional transition frame between the IS7 and the IS118, either while suspended or while stacking IS7 cabinets on
IS118.
The IS7 & IS118 Rigging Frame's maximum load capacity (765kg / 1686.5 lbs) far exceeds the realistic maximum
amount of IS7 or IS118.
In instances where the tilt and curvature of the array causes the centre of gravity to be outside of the depth of the frame,
use of the Extended Beam (930-0021) or Moving Point Extended Beam (930-0033) is necessary.
305 mm / 12 in
Adamson Systems Engineering | IS-Series Rigging Manual
5
3
4
2
1
Ø 12 mm / 0.63 in
No. Component
1 Rigging Link
2 Stacking Link
3 Quick-Release Pin
4 Lifting Plate
5 M6 Screw
528 mm / 20.8 in
Quantity
4
2
6
2
16
Page 7