Advertisement
Quick Links
Advertisement
Related Manuals for Adamson IS119
Summary of Contents for Adamson IS119
- Page 2 Distribution Date: June 1st, 2017 • Copyright 2017 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
A qualified technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specified local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. -
Page 4: Product Introduction
Up to 16 IS119 can be flown when using the IS10 & IS119 Support Frame. • The IS119 can be flown in the same array as the IS10 when using an additional IS10 & IS119 Support Frame. • Adamson’s use of proprietary techologies such as Advanced Cone Architecture give the IS119 an extremely high maximum SPL level of 138 dB. -
Page 5: Wiring & Amplification
Wiring & Amplification Wiring The IS119 (994-0005) comes with 4x Neutrik Speakon™ NL4 connections, wired in parallel. The 2 rear connections pass pin 1 +/- to the driver and the 2 front connections pass pin 2 +/- to the driver. - Page 6 Amplification The IS119 is paired with Lab.gruppen D-Series amplifiers. Maximum quantities of the IS119 per amplifier model are shown below. For a master list, please refer to the Adamson PLM & Lake Handbook, found on our website. 2x IS119 4x IS119...
-
Page 7: Presets & Control
Alignment When flown or stacked in the same array as an IS10, all IS119 presets contain the inherent delay needed to be properly phase-aligned. When flown separately or ground stacked, IS119 subs should be phase-aligned to the IS10 array using measurement software. -
Page 8: Acoustic Data
Weight (kg / lbs) 44.5 / 98 Colour Black & White (Standard), RAL Colours (On Demand) Processing Lake ** 12 dB crest factor pink noise at 1m, half space, using specified processing and amplification Adamson Systems Engineering | IS119 User Manual Page 8...