Adamson IS Series User Manual
Hide thumbs
Also See for IS Series:
- Rigging manual (39 pages) ,
- User manual (9 pages) ,
- User manual (9 pages)
Advertisement
Quick Links
Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally.
Protect the cabling from being walked on or pinched.
Read the appropriate IS-Series Rigging Manual before installing the product.
Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging
Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
IS7 User Manual
3
4
5
6
7
8
Page 1
Advertisement
Related Manuals for Adamson IS Series
Summary of Contents for Adamson IS Series
- Page 1 Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
- Page 2 IS7p User Manual Distribution Date: March 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. -
Page 4: Product Introduction
The IS7p is an ultra-compact point source enclosure. It contains two symmetrically arrayed 7” LF transducers and a 3” HF compression driver mounted on an Adamson waveguide, available in two configurations; with dispersion patterns of either 70° x 40° (HxV) or 100° x 50° (HxV) each rotatable in increments of 90°. -
Page 5: Wiring
Pins 1+/- are connected to the 2x ND7-LM16 MF transducers, wired in parallel. • Pins 2+/- are connected to the NH3-8 HF transducer. PARALLEL IS7p Jackplate IS7pb Jackplate PARALLEL INPUT PARALLEL INPUT IS7p & IS7pb Internal Wiring (IS7pb only has one input) IS7p User Manual Adamson Systems Engineering | Page 5... -
Page 6: Amplification
IS7p Amplification The IS7p is paired with Lab.gruppen D-Series amplifiers. Maximum quantities of the IS7p per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found on the Adamson website. https://adamsonsystems.com/support/downloads-directory/is-series/is7p/327-max-enclosures-per- amplifier-v5-0-1-7-1-1 D40:4L... -
Page 7: Presets & Control
The Adamson Load Library, found on the Adamson website, contains presets designed for a variety of IS7p applications. Furthermore, there are presets designed to pair with either Adamson subs, or Adamson Line Arrays. For a master list, please refer the Adamson PLM & Lake Handbook, found on our website. -
Page 8: Technical Specifications
Weight (kg / lbs) 15 / 33.1 Colour Black & White (Standard), RAL Colours (On Demand) Processing Lake ** 12 dB crest factor pink noise at 1m, free field, using specified processing and amplification Adamson Systems Engineering | IS7p User Manual Page 8...