Siemens SINUMERIK 828D Manual page 128

3.8
128
Important functions for 3- to 5-axis machining
ORIC
Face milling
CUT3DFS
CUT3DFF
CUT3DF
CUT3DFD
3D circumferential milling with limiting surface (combined circumferential/face milling)
CUT3DCC
CUT3DCCD
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
Travel path is extended by means of circles. The change in
orientation is also performed proportionately in the circle.
Constant orientation (3-axis). Tool points in the Z direction of the
coordinate system defined via G17 - G19. Frames do not have
any effect.
Constant orientation (3-axis). Tool in Z direction of the coordinate
system currently defined via the frame.
5-axis with variable tool orientation.
Activating the 3D radius compensation based on a differential tool
for face milling.
CNC program relates to the contour on the machining surface.
The CNC program relates to the tool center point path.