Siemens SINUMERIK 828D Manual page 169
Milling with sinumerik mold-making with 3- to 5-axis simultaneous milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Reference section
TOFRAMEZ
TOROT
TOROTX
TOROTY
TOROTZ
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
Tool frame, coordinate system with Z axis in tool direction,
zero is the tool tip, identical to TOFRAME
Tool frame, coordinate system with Z axis in tool direction, only
contains the rotation component from TOFRAME. The zero
remains unchanged.
Tool frame, coordinate system with X axis in tool direction, only
contains the rotation component from TOFRAME. The zero
remains unchanged.
Tool frame, coordinate system with Y axis in tool direction, only
contains the rotation component from TOFRAME. The zero
remains unchanged.
Tool frame, coordinate system with Z axis in tool direction, only
contains the rotation component from TOFRAME. The zero
remains unchanged.
8.1
169
Advertisement
Table of Contents
