Siemens SINUMERIK 828D Manual page 62

2.10
Lines G0, G1, G2, G3 shown
Vectors
62
General information on workpiece production
Hide G0, G1, G2, G3 lines:
With the softkeys you can hide G0, G1, G2, G3 or points so that the graphic lines are
4
shown clearly. In the example, the rapid traverse movements G0 are hidden.
Display vectors, surfaces and curvature:
In addition to the classic view, for mold-making programs, you can also display the rotary axis
vectors and grid mesh (surface, mesh), for example.
Press the >> softkey 3
displayed.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
Hide G0 lines
and then Vectors or Surface or curvature. The appropriate view is
Surface (mesh)