Siemens SINUMERIK 828D Manual page 80

3.4
Important functions for 3- to 5-axis machining
N620 CYCLE800(4,"TABLE",220000,57,0,0,50,-15,0,0,50,51.76,0,0,,1)
N625 ; Swiveling Plane_1 additive Y=-7 degrees
N630 CYCLE800(4,"TABLE",200001,54,-35,-24,0,-7,0,0,0,0,0,1,,1)
N640 ; Deep-hole drilling D8.5 with -7 degrees
N650 MCALL CYCLE83(10,0,2,-20,,-5,,054,0,100,0,0,4,1,0,0,0,1,11121112)
N660 G0 X0 Y0
N670 X0 Y60
N680 MCALL
N690 ; Swivel the plane to the basic position
N700 CYCLE800(2,"TABLE",200000,57,0,0,0,0,0,0,0,0,0,1,,1)
N710 ; Deselection CYCLE800
N720 CYCLE800()
N730 M30; end of program
80
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling