Transport/Temporary Storage/Disposal; Checking The Condition Upon Delivery; Transport - Speck pumpen Normblock Installation & Operating Manual

12 of 58

3 Transport/Temporary Storage/Disposal

3 Transport/Temporary Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify Speck Pumpen or the supplying dealer (as applicable) and the insurer
about the damage in writing immediately.

3.2 Transport

DANGER
The pump (set) could slip out of the suspension arrangement
Danger to life from falling parts!
▷ Always transport the pump (set) in the specified position.
▷ Never attach the suspension arrangement to the free shaft end or the motor
eyebolt.
▷ Give due attention to the weight data and the centre of gravity.
▷ Observe the applicable local health and safety regulations.
▷ Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.
CAUTION
Incorrect transport of the pump
Damage to the shaft seal!
▷ For transport, lock the pump shaft with a suitable transport lock to prevent any
movement of the shaft.
When transporting the pump without motor, shaft 210 must be locked.
1. Remove cover plates 68-3 from the openings of drive lantern 341.
2. Insert lock washers 931.95 into the shaft groove.
3. Tighten bolts 901.50.
To transport the pump/pump set suspend it from the lifting tackle as shown.
Fig. 1: Transporting the pump
Fig. 2: Transporting the pump set
Normblock