Csmp Set Text Mode Parameters; Csdh Show Text Mode Parameters - Nokia 30 GSM Connectivity Terminal At Command Manual

<tosca> GSM 04.11 RP SC address Type-of-Address octet in integer format:
129
145

10.5 +CSMP SET TEXT MODE PARAMETERS

Command
Set +CSMP=<fo>,<vp>,<pid>,<dcs>
Read +CSMP?
Test +CSMP=?
The +CSMP command is used to select values for the additional parameters needed when
the SM is sent to the network or placed in storage when the text format message mode is
selected. It is possible to set the validity period starting from the moment when the SM is
received by the SMSC (<vp> is in range 0... 255) or to define the absolute time of the validity
period termination (<vp> is a string). The format of <vp> is given by <fo>. The values of
these parameters may also change when the +CRES is used.
NOTE: When storing an SMS-DELIVER from the TE to the preferred memory storage in the
text mode (refer to command Write Message to Memory +CMGW), the <vp> field can be
used for <scts>.
Defined values
<fo> first octet of GSM 03.40 SMS-DELIVER or SMS-SUBMIT in integer format
<vp> depending on the SMS-SUBMIT <fo> setting: GSM 03.40 TP-Validity Period
either in integer format or in time-string format
<pid> GSM 03.40 TP-Protocol-Identifier in integer format
<dcs> GSM 03.38 SMS Data Coding Scheme in integer format

10.6 +CSDH SHOW TEXT MODE PARAMETERS

Command
Set
+CSDH=<show>
Read +CSDH?
Test +CSDH=?
unknown/telephony
international/telephony
Response
+CSMP: <fo>,<vp>,<pid>,<dcs>
Response Default
0
+CSDH: <show>
+CSDH: (0,1)
Default
17,167,0,0
57/107