Cmgf Message Format; Csca Service Centre Address - Nokia 30 GSM Connectivity Terminal At Command Manual

10.3 +CMGF MESSAGE FORMAT

Command
Set +CMGF=<mode>
Read +CMGF?
Test +CMGF=?
The +CMGF command tells the Nokia 30 the input and output format of messages to be
used. <mode> indicates the format of the messages used with the send, list, read and write
commands and the unsolicited result codes resulting from the received messages. The mode
can either be the PDU mode (entire TP data units used) or the text mode (headers and body
of the messages given as separate parameters). The text mode uses the character set
specified by the command Select TE Character Set +CSCS to be used in the message body.
The test command returns the supported modes as a compound value.
Defined values
<mode>:
0
1

10.4 +CSCA SERVICE CENTRE ADDRESS

Command
Set +CSCA=<sca>,<tosca>
Read +CSCA?
Test +CSCA=?
The +CSCA command updates the SMSC address through which mobile-originated SMs are
transmitted. In text mode, the setting is used by the send and write commands. In the PDU
mode, the setting is used by the same commands, but only when the length of the SMSC
address coded into TPDU equals zero. The SMSC address may also change when the
+CRES is taking action.
The read command returns the current SMSC address settings.
Defined values
<sca> GSM 04.11 RP SC address Address-Value field in string format
Response
+CMGF: <mode>
+CMGF: (0,1)
PDU mode
text mode
Response
+CSCA: <sca>,<tosca>
Default
0
Default
"",129
56/107