Cr Service Reporting Control; Ceer Extended Error Report - Nokia 30 GSM Connectivity Terminal At Command Manual

Defined values
<ver> : RLP version number in integer format; when version indication is not present, it
shall equal 0
<iws> Interworking Function (IWF) to MS Window size
<mws> MS to IWF Window size
<T1> acknowledgement timer in units of 10 ms
<N2> retransmission attempts
<T4>: resequencing period in units of 10 ms

6.3.6 +CR Service reporting control

Command
Set +CR=<mode>
Read +CR?
Test +CR=?
The +CR command controls the return of the intermediate result code +CR: <serv>. If
enabled, the intermediate result code is transmitted during the connect negotiation when the
Nokia 30 has determined the speed and quality of service that will be used, and before any
error control or data compression reports are transmitted or any final result code (e.g.
CONNECT) is transmitted.
Defined values
<mode>:
0
1
<serv>:
REL ASYNC asynchronous non-transparent

6.3.7 +CEER Extended error report

Command
Execute +CEER
Test +CEER=?
Response Default
0
+CR: <mode>
+CR: (0,1)
disables reporting
enables reporting
Response
+CEER: <report>
28/107