5.2 DE FACTO
5.2.1 &V View configuration
Command
Execute
&V
5.2.2 &W Store configuration
Command
Execute
&W[0]
&W1
The &W command stores the current parameter values in the given profile. The command
parameters that are stored in a profile are the same as those listed under the &F command,
except for the parameters of the following commands that are not stored: +CMOD, +CSCA,
+CSMP.
5.2.3 &Y Select power-up configuration
Command
Set
&Y[0]
&Y1
The &Y command defines the profile from which parameters are loaded when the Nokia 30 is
activated. This setting is not part of the settings that are stored in a profile. The &F command
does not affect this setting.
5.3 GSM 07.07
5.3.1 +CGMI Request ME manufacturer identification
Command
Execute
+CGMI
Test
+CGMI=?
Description
Show current and stored profile settings (all command parameter values defined
under &F plus &Y setting)
Description
Store to profile 0
Store to profile 1
Description
Power-up uses profile 0
Power-up uses profile 1
Response
Nokia Mobile Phones
14/107