Autopin Security Feature; Activating And Using Configuration Mode; Changing The Loop Interruption Time - Nokia 32 Features Manual

Hide thumbs Also See for 32:

Table of Contents

2.10 AUTOPIN SECURITY FEATURE

The Nokia 32 terminal has an AutoPIN security feature. It saves the PIN code in the

terminal's memory when the code is entered for the first time or when the code is changed.

In addition, the AutoPIN feature enables device recovery after occasional power cuts without

on-site intervention. The terminal enters the PIN code automatically the next time it switches

on and requests the PIN code.

Use of the SIM card in other GSM terminals or mobile phones can be prevented. The user

does not have to know the PIN code. However, other SIM cards can be used with the

terminal. The AutoPIN feature can be deactivated using the Nokia 32 Configurator software

(menu: GSM Security -> PIN Code Settings).

Figure 5: Changing PIN code settings

The default value is that the AutoPIN feature is active.

Changing some Nokia 32 terminal settings is also possible usi n g a normal telephone set.

This chapter describes how this so-called configuration mode is activated and how it is used.

To activate the configuration mode, key in **####**.

The configuration mode is protected with a four-digit access code. When the configuration

mode has been activated, the Nokia 32 terminal requests for an access code for changing

the settings. The default code is 1234. To change the default access code, use the Nokia 32

Configurator Software.

To enter the access code, key in AccessCode#.

In other words, if you use the default access code, dial **####**1234# to activate the

configuration mode.

The loop interruption time is used to indicate call disconnection.

The default loop interruption time is 300 milliseconds. Key in a zero to disable the loop

interruption. After you have keyed in the interruption time, the Nokia 32 terminal returns to

the configuration mode.

Table of Contents