H Hook Control; O Return To Online Data State; S0 Automatic Answer - Nokia 30 GSM Connectivity Terminal At Command Manual

6.1.5 H Hook control

Command
Execute H[0]
Implementation is according to GSM 07.07 section 6.18.

6.1.6 O Return to online data state

Command
Execute O
The O command returns the Nokia 30 to the online data state from the online command
mode. Implementation is according to GSM 07.07 section 6.18.

6.1.7 S0 Automatic answer

Command
Set S0=<n>
Read
S0?
The S0 command sets the number of rings (RING or +CRING result codes) that are emitted
before automatic answering is enabled. 0 disables auto answering.
Description
hang up all calls (except possible waiting call) if only single mode calls are in
progress, or switch to voice mode if alternate mode call is active
Possible verbose Numeric
result codes (V1) (V0)
CONNECT 1
CONNECT 1200 5
CONNECT 2400 10
CONNECT 4800 11
CONNECT 9600 12
CONNECT 14400 17
CONNECT 19200 18
CONNECT 28800 19
CONNECT 38400 20
ERROR 4
CARRIER 16
NO CARRIER 3
OK 0
Response <n> values
0..255 (default 0)
<n> 000..255
Description
Data/fax call established; rate 300 bps (or X
forbids rate display)
Data/fax call established; rate 1200 bps
Data/fax call established; rate 2400 bps
Data/fax call established; rate 4800 bps
Data/fax call established; rate 9600 bps
Data call established; rate 14400 bps
Data call established; rate 19200 bps
Data call established; rate 28800 bps
Data call established; rate 38400 bps
Command cannot be carried out
Call will be established
Call could not be established
Command aborted
20/107