Nokia 30 GSM Connectivity Terminal At Command Manual page 105

3 4 5
+CPBF= 1
+CPBF=? 1
+CPBW= 24 15 1
+CPBW=? 1
1. Phone security code required to execute the AT command
2. ME does not have a SIM connected to it
3. SIM PIN required to execute the AT command
4. SIM PUK required to execute the AT command
5. Memory location does not exist
6. Phonebook memory location is empty
7. Match in searched string is not found in any of the memory locations
8. General memory error; e.g. problems in SIM database communication
9. Call hold/retrieve/swap/build/split/transfer/deflection failed or cannot be carried out
10. Manual network selection is not possible because unavailable or forbidden network
name was given, or call is active
11. Invalid password was given
12. SIM PUK2 required to execute the AT command
13. There is no network service to complete the request
14. Supplementary service command failed due to an unknown error; i.e. an error that is
not covered by other <err> values
15. AT interpreter does not support the operation
16. SIM PIN2 required to execute the AT command
17. Alpha entry to be stored is too long
18. Number to be read/stored is too long
19. Number to be stored contains characters that are not available in that memory
20. SIM interface control is not reserved or the maximum number of applications has
reserved the SIM control
21. –
22. External ME UI cannot be accessed
23. Network timeout
24. Entries cannot be stored in the currently selected phonebook memory (e.g. on
missed calls list)
25. There is no active voice call
Table 5. +CME error values
10 11 12 16 17
2 3 4
2 3 4
2 3 4 16
2 3 4
18 21 22 23 24
8
8
12 5 8 17
8
26 27 30 31 100
18 19
98/107