Cmms More Messages To Send - Nokia 30 GSM Connectivity Terminal At Command Manual

<da> GSM 03.40 TP-Destination-Address Address-Value field in string format; type of
address given by <toda>
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in integer format
129
145
<mr> GSM 03.40 TP-Message-Reference in integer format
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
<ackpdu> GSM 03.40 RP-User-Data element of RP-ACK PDU
10.16

+CMMS MORE MESSAGES TO SEND

Command
Set +CMMS=[<n>]
Read +CMMS?
Test +CMMS=?
The set command controls the continuity of a SMS relay protocol link. When the feature is
enabled (and supported by the network), multiple messages can be sent much faster as the
link is kept open.
The test command returns the supported values as a compound value.
Defined Values
<n>:
0 disable
1 keep enabled until the time between the response of the latest message send
command (+CMGS, +CMSS, etc.) and the next send command exceeds 1-5
seconds (the exact value is up to the ME implementation); then the ME shall
close the link and the TA automatically switch <n> back to 0
2 enable (if the time between the response of the latest message send command
and the next send command exceeds 1-5 seconds (the exact value is up to the
ME implementation), the ME shall close the link but the TA shall not automatically
switch back to <n>=0)
unknown/telephony
internal/telephony
Response
+CMMS: <n>
+CMMS: (list of supported <n>s)
Default +cms
error
70/107