Ccfc Call Forwarding Number And Conditions - Nokia 30 GSM Connectivity Terminal At Command Manual

The test command returns the supported values.
Defined values
<n> sets/shows the +CSSI result code presentation status:
0
1
<m> sets/shows the +CSSU result code presentation status:
0
1

7.11 +CCFC CALL FORWARDING NUMBER AND CONDITIONS

Command
Execute +CCFC=<reason>,
<mode>,<number>,
<type>,<class>,
<subaddr>,
<satype>,
<time>
Test +CCFC=?
This command controls call forwarding supplementary services. The <reason> values 4 and
5 are only applicable for <mode>=0. When the status request response from the network
indicates that the SS is active for specific data bearer services (e.g. 'circuit async'), the AT
interface should only indicate 'data' (<class>=2) (the 'not active' case is only displayed when
the SS is not active to any service; i.e. +CCFC: 0,7).
Defined values
<reason>:
0 unconditional
1 mobile busy
2 no reply
3 not reachable
4 all call forwarding (GSM 02.30)
4 all conditional call forwarding (GSM 02.30)
disable
enable
disable
enable
Response
When <mode>=2:
+CCFC: <status>,<class1>[,<number>,<type>
[,<subaddr>,<satype>[,<time>]]][<CR><LF>]
+CCFC: <status>,<class2>[,<number>,<type>
[,<subaddr>,<satype>[,<time>]]]
[...]]
+CCFC: (0-5)
default +cme
error
[,,, x
129/145,7
,,128,20]
44/107