Ccwa Call Waiting - Nokia 30 GSM Connectivity Terminal At Command Manual

discarded if the Nokia 30 is in the online data state. This result code is enabled and disabled
with the +CSSN command.
Defined values
<index> Please refer to chapter Closed user group +CCUG"
<code>:
0
1
2
3
4
5
6
7
8
<number> String type phone number of a format specified by <type>
<type> Type of address octet in integer format (refer to GSM 04.08, subclause
10.5.4.7):
129
145

15.3.7 +CCWA Call waiting

Format Description
+CCWA: Given when +CCWA=1 and an incoming MT call is received when there are active or
<number>,<type>, held calls in the ME; discarded if in the online data state
<class>
This command allows the controlling of the Call Waiting supplementary service. Activation,
deactivation and status query are supported. When querying the status of a network service
(<mode>=2), the response line for 'not active' case (<status>=0) should be returned only if
the service is not active for any <class>. The parameter <n> is used to disable/enable the
presentation of an unsolicited result code +CCWA: <number>, <type>, <class>[,<alpha>] to
the TE when a call waiting service is enabled. The command should be abortable when the
network is interrogated.
This is a forwarded call (MT call setup)
This is a CUG call (also <index> present) (MT call setup)
Call has been put on hold (during a voice call)
Call has been retrieved (during a voice call)
Multiparty call entered (during a voice call)
Call on hold has been released (this is not an SS notification)
(during a voice call)
–
Call is being connected (alerting) with the remote party in the
alerting state in an explicit call transfer operation (during a voice
call)
Call has been connected with the other remote party in an explicit
call transfer operation (number and sub-address parameters may
also be present) (during a voice call or a MT call setup)
Unknown/telephony
International/telephony
88/107