Cscb Select Cell Broadcast Message Types - Nokia 30 GSM Connectivity Terminal At Command Manual

The +CSDH command controls whether detailed header information is shown in the text
mode result codes.
The test command returns the supported values as a compound value.
Defined values
<show>:
0
1

10.7 +CSCB SELECT CELL BROADCAST MESSAGE TYPES

Command
Set +CSCB=<mode>,<mids>,<dcss>
Read +CSCB?
Test +CSCB=?
The +CSCB command defines the types of CBMs that are to be received.
The test command returns the supported modes as a compound value.
Defined values
<mode>:
0
1
<mids> String type, all the possible combinations of GSM 03.41 CBM message
identifiers, e.g. "0,1,5,320-478,922"
<dcss> String type, all the possible combinations of 03.38 CBM data coding schemes,
e.g. "0-3,5"
do not show header values defined in the commands +CSCA and
+CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor
<length>, <toda> or <tooa> in the +CMT, +CMGL, +CMGR result
codes for SMS-DELIVERs and SMS-SUBMITs in text mode; for
SMS-COMMANDs in the +CMGR result code, do not show <pid>,
<mn>, <da>, <toda>, <length> or <cdata>.
show the values in result codes
Response
+CSCB:
<mode>,<mids>,<dccs>
+CSCB: (0,1)
message types specified in <mids> and <dcss> are accepted
message types specified in <mids> and <dcss> are not accepted
Default +cms error
0,"","" x
58/107