Me Control And Status Commands (Gsm 07.07); Cpin Enter Pin - Nokia 30 GSM Connectivity Terminal At Command Manual

8.

ME CONTROL AND STATUS COMMANDS (GSM 07.07)

8.1 +CPIN ENTER PIN

Command
Set +CPIN=<pin>,<newpin>
Read +CPIN?
Test +CPIN=?
The +CPIN command sends a password to the Nokia 30 that is required for operating the
Nokia 30 (SIM PIN, SIM PUK, PH-SIM PIN, etc.). Note that quotation marks must be used in
this command (e.g. AT+CPIN="1234").
If the required PIN is SIM PUK or SIM PUK2, <newpin> is required. <newpin> replaces the
old PIN of the SIM.
The read command returns an alphanumeric string that indicates whether a password is
required.
Defined values
<pin>, <newpin>
<code>:
READY
SIM PIN
SIM PUK
PH-SIM PIN
PH-FSIM PIN
password
PH-FSIM PUK
unblocking
SIM PIN2
Response
+CPIN: <code>
string type values
ME is not pending for any password
ME is waiting for a SIM PIN
ME is waiting for a SIM PUK
ME is waiting for a phone-to-SIM card password
ME is waiting for a phone-to-very-first SIM card
ME is waiting for a phone-to-very-first SIM card
password
ME is waiting for a SIM PIN2 (it is recommended that
this <code> be returned only if the last executed
command resulted in a PIN2 authentication failure
(i.e. +CME ERROR: 17); if the PIN2 is not entered
immediately after the failure, it is recommended that
the ME should not block its operation)
+cme
error
x
x
47/107