Cgmm Request Me Model Identification; Cgmr Request Me Revision Identification; Cgsn Request Me Serial Number Identification; Cscs Select Te Character Set - Nokia 30 GSM Connectivity Terminal At Command Manual

5.3.2 +CGMM Request ME model identification

Command
Execute +CGMM
Test +CGMM=?

5.3.3 +CGMR Request ME revision identification

Command
Execute +CGMR
Test +CGMR=?

5.3.4 +CGSN Request ME serial number identification

Command
Execute +CGSN
Test +CGSN=?

5.3.5 +CSCS Select TE character set

Command
Set +CSCS=
<chset>
Read +CSCS?
Test +CSCS=?
The +CSCS command informs the Nokia 30 of the character set that is used by the DTE.
Defined values
<chset> DTE character set:
"GSM"
"HEX"
Response
Nokia 30
Response
Vx.xx dd-mm-yy TME-3 © NMP
Response
IMEI
Response
+CSCS: <chset>
+CSCS: ("GSM","HEX","IRA","PCCP437","PCDN","8859-
1")
GSM default alphabet (GSM 03.38 subclass 6.2.1); this setting
easily causes software flow control (XON/XOFF) problems.
Character strings consist only of hexadecimal numbers from 00 to
FF; e.g. "032FE6" equals three 8-bit characters that in decimals
are 3, 47 and 230; no conversions of the original ME character set
should be carried out.
+cme error
x
+cme error
x
+cme error
X
Default
"PCCP437"
15/107