Cpms Preferred Message Storage - Nokia 30 GSM Connectivity Terminal At Command Manual

10.2 +CPMS PREFERRED MESSAGE STORAGE

Command
Set +CPMS=<mem1>
,<mem2>
,<mem3>
Read +CPMS?
Test +CPMS=?
The +CPMS command selects the memory storage <mem1>, <mem2> and <mem3> to be
used for reading, writing, etc.
The test command returns lists of the supported memory storage.
Defined values
<mem1> memory from which messages are read and deleted (the commands List
Messages +CMGL, Read Message +CMGR and Delete Message +CMGD)
<mem2> memory to which writing and sending operations are made (the commands
Send Message from Storage +CMSS and Write Message to Memory +CMGW)
<mem3> memory to which received SMs are preferably to be stored (unless forwarded
directly to the TE; refer to the command New Message Indications +CNMI); the
received CBMs are always stored in the "BM" (or some manufacturer-specific
storage) unless directly forwarded to the TE; the received status reports are
always stored in the "SR" (or a manufacturer-specific storage) unless directly
forwarded to the TE.
"ME"
"SM"
<usedx> integer type; the number of messages currently in <memx>
<totalx> integer type; the total number of message locations in <memx>
Response
+CPMS: <used1>,<total1>,<used2>,
<total2>,<used3>,<total3>
+CPMS: <mem1>,<used1>,<total1>,<mem2>,
<used2>,<total2>,<mem3>,<used3>,<total3>
+CPMS: ("ME","SM"),("ME","SM"),("MT")
ME message storage
SIM message storage
Default +cms error
"SM","SM", x
"MT"
x
55/107