Extended Commands - Nokia 30 GSM Connectivity Terminal At Command Manual

3.3 EXTENDED COMMANDS

Table 4. Extended command format in command description subsections
Command
Set/execute
+CMD[=<x>,...]
Read +CMD?
Test +CMD=?
The extended command ('+' prefix) parameter default values are given in a separate column.
If the default value is not in brackets, the default value is the &F default value of the
corresponding parameter. When such a parameter is omitted from a command, its value
remains the same as before. If the default value is in brackets, this value shall be used when
the parameter is omitted from the command line. The setting of such a parameter is not
stored in the memory. If a parameter has no default value, it must always be given.
NOTE: Voice (+V) and fax (+F) commands do not follow this format exactly.
GSM commands can also return a +CME ERROR or +CMS ERROR final result code, when
the error is related to the ME or network functionality. The last column indicates whether
these codes can be returned. The presentation of +CME ERROR can be controlled with the
+CMEE command.
Response
[+CMD: <y>,...]
+CMD: <z>[,...]
[+CMD: ...]
Default +cme error/+cms
error
[x,...] [x]
[x]
[x]
5/107