13.3 +CGQREQ QUALITY OF SERVICE PROFILE (REQUESTED)
Command
Set
+CGQREQ=<cid>,<precedence>,<delay>,<
reliability>,<peak>,<mean>
Read
+CGQREQ?
Test
+CGQREQ=?
Optional. 07.60 section 10.2.2. Used to specify a Quality of Service Profile that is used when
the MT sends an Activate PDP Context Request message to the network. This command is
used in conjunction with the +CGDATA command.
13.4 +CGQMIN QUALITY OF SERVICE PROFILE (MINIMUM ACCEPTABLE)
Command
Set
+CGQMIN=<cid>,<precedence>,<delay>,<r
eliability>,<peak>,<mean>
Read
+CGQMIN?
Test
+CGQMIN=?
Optional. 07.60 section 10.2.3. Used to specify a minimum acceptable profile which is
checked by the MT against the negotiated profile returned in the Activate PDP Context
Accept message. This command is used in conjunction with the +CGDATA command.
13.5 +CGATT GPRS ATTACH OR DETACH
Command
Set
+CGATT= <state>
Read
+CGATT?
Test
+CGATT=?
Optional. The execution command is used to attach the MT to, or detach it from, the GPRS
service. Any active PDP contexts will automatically be deactivated when the attachment
state changes to detached.
Response
+CGQREQ: <cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
[<CR><LF>+CGQREQ: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>
[...]]
+CGQREQ: (1-2),(1-3),(1-4), (1-5),
(1-9),(1-18,31)
Response
+CGQMIN: <cid>,<precedence>,<delay>,
<reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>
[...]]
+CGQMIN: (1-2),(1-3),(1-4),(1-5),
(1-9),(1-18,31)
Response
+CGATT: <state>
+CGATT: (0-1)
78/107