Csas Save Settings; Cres Restore Settings - Nokia 30 GSM Connectivity Terminal At Command Manual

10.8 +CSAS SAVE SETTINGS

Command
Execute
+CSAS=<profile>
Test +CSAS=?
The +CSAS command saves active message service settings to a non-volatile memory. The
settings specified in the commands Service Centre Address +CSCA, Set Message
Parameters +CSMP and Select Cell Broadcast Message Types +CSCB are saved. The
SMSC address is not stored if +CSCA is not set/restored during the current session (i.e.
+CSCA? returns +CSCA: "",129). The protocol ID (<pid>), data coding scheme (<dcs>) and
validity period (<vp>) are not stored if the +CSMP parameter <fo> does not indicate SMS-
SUBMIT (i.e. bits 1-0 are not '01'). In addition, the validity period is not stored if <fo> does
not indicate the relative validity period format (i.e. bits 4-3 are not '10'). The destination
address or alpha tag cannot be stored through an AT interface.
NOTE: The values that are not stored should remain intact.
The test command should display the supported profile numbers for the reading and writing
of settings.

10.9 +CRES RESTORE SETTINGS

Command
Execute
+CRES=<profile>
Test +CRES=?
The +CRES command restores message service settings from non-volatile memory to the
active memory. The settings specified in the commands Service Centre Address +CSCA, Set
Message Parameters +CSMP and Select Cell Broadcast Message Types +CSCB are
restored. If the protocol ID, data coding scheme or validity period is restored, the +CSMP
parameter <fo> is forced to be SMS-SUBMIT (i.e. bits 1-0 are set to '01'). In addition, if a
validity period is restored, <fo> is forced to indicate the relative validity period format (i.e. bits
4-3 are set to '10'). The rest of the <fo> bits are set to zero.
The test command shall display the supported profile numbers.
Response
+CSAS: (1-1)
Response
+CRES: (1-1)
Default +cms
error
[1] x
x
Default +cms
error
[1] x
x
59/107