Cssn Supplementary Service Notifications - Nokia 30 GSM Connectivity Terminal At Command Manual

Defined values
<n> sets/shows the result code presentation status:
0
1
<str> string type USSD string (when <str> parameter is not given, the network is not
interrogated):
-
-
-
-
<dcs> GSM 03.38 Cell Broadcast Data Coding Scheme in integer format (default 0)
<m>:
0
1

7.10 +CSSN SUPPLEMENTARY SERVICE NOTIFICATIONS

Command
Set +CSSN=<n>,<m>
Read
+CSSN?
Test +CSSN=?
The +CSSN command controls the presentation of the +CSSI intermediate result code and
the +CSSU unsolicited result code.
disable
enable
if <dcs> indicates that the GSM 03.38 default alphabet is used:
if the TE character set is not "HEX" (refer to the Select TE Character
Set +CSCS command): the Nokia 30 converts the GSM alphabet
into the current TE character set according to the rules of GSM
07.05, Annex A
if the TE character set is "HEX": the Nokia 30 converts each 7-bit
character of the GSM alphabet into two IRA-character long
hexadecimal numbers (e.g. character Π (GSM 23) is presented as
17 (IRA 49 and 55))
if <dcs> indicates that an 8-bit data coding scheme is used: the
Nokia 30 converts each 8-bit octet into two IRA-character long
hexadecimal numbers (e.g. octet with the integer value 42 is
presented to the TE as two characters 2A (IRA 50 and 65))
no further user action required (network-initiated USSD-Notify, or
no further information needed after mobile-initiated operation)
further user action required (network-initiated USSD-Request, or
further information needed after mobile-initiated operation)
Response
+CSSN: <n>,<m>
+CSSN: (0,1),(0,1)
Default
0,0
43/107