Connecting The Mains Power Supply - Dräger Infinity Acute Care System Workstation Critical Care Supplement To Instructions For Use

Assembly and preparation

Connecting the mains power supply

WARNING
Risk of electric shock and of device failure
If the device is connected to a power socket
with incorrect mains voltage or without a pro-
tective ground, the user can be injured and the
device damaged.
Only connect the power cable to power sock-
ets with a protective ground and the correct
mains voltage. Observe the technical data.
NOTE
The mains power socket in use must be freely ac-
cessible during operation.
Connecting the nurse call
WARNING
Risk of patient injury
All data transferred via the nurse call are for
information only and must not be used as the
sole basis for diagnostic or therapeutic deci-
sions. The nurse call is not intended for use
with a distributed alarm system according to
IEC 60601-1-8:2012.
Transportation of patients within the hospital
When transporting the patient within the hospital,
grasp the trolley handle firmly and push the device
in longitudinal direction.
10