Preparing The C-Tong For Welding Operation; Changing The C-Tong Electrode Yoke - Car-O-Liner CTR9 Instruction Manual

Car-O-Liner Group AB
4.5

Preparing the C-Tong for welding operation

4.5.1 Changing the C-Tong electrode yoke

50
When carrying out the operations described in section 4.5, it is recommend-
ed to keep the C-Tong in the C-Tong holder of the welding machine.
Change the electrode yoke by following the instructions below:
1. Press the "Water flow" button to turn OFF water pump flow.
2. Release the yoke locking lever.
3. Disconnect the two cooling liquid hoses by the
quick-action couplings.
CTR9
49023, EN - rev. 4, 2020-01