Car-O-Liner CTR9 Instruction Manual page 13

CTR9
49023, EN - rev. 4, 2020-01
WARNING! Electromagnetic field may damage pacemaker, watches,
magnetic strip cards and magnetic data carriers.
WARNING! Appropriate protection (protective gloves, visor, clothing and
shoes) must be worn when using this equipment.
WARNING! Do not fill the water tank with anything but water (and
antifreeze agent, if needed). Improper handling may result in personal injury
and/or damage to the equipment.
WARNING! Please note, that the support arm is designed only for a limited
sideways rotation angle. Do not exceed this angle by pulling the hanging C-
Tong sideways. The welder might tip, causing personal injuries or material
damage.
WARNING! Please note, that the support arm is designed only for a limited
°
lengthwise range of 45 from vertical. Do not exceed this angle. When the
balancer suspension rope is fully extended, do not pull the hanging C-Tong
any further. The welder might tip, causing personal injuries or material
damage.
WARNING! To avoid the risk of the welder tipping when using the support
arm, always work within the allowed range as described above.
If you need to reach further, move the machine. See section 3.12.2 Moving
the machine with support arm.
WARNING! When working with the C-Tong hanging from the support arm,
always make sure that the wheels are unblocked. Otherwise the welder might
tip, causing personal injuries or material damage.
WARNING! The support arm is only intended for suspension of the
C-Tong. No other objects are alowed. Maximum weigth on the suspension
rope is 20 kg (44 lbs). Do not exceed this limit. The welder might tip,
causing personal injuries or material damage.
WARNING! Water must not come in contact with electrical contacts of the
welder when disconnecting the welding cable water hoses. Risk of material
damage.
Car-O-Liner Group AB
13